Ncstudio PS/2 Handheld Keypad

Product Detailed

1. Adopting PS2 interface hand-hold keyboard;
2. More convenient in long-distance operation;
3. Strong anti-interference.

l Adopting PS2 interface, with 4.2 M connection cable;

l 5 * 4 in the layout, totally 20 buttons alignment, every button with corresponding typical function;

l More convenient in long-distance operation;

l Strong anti-Interference;

l Exclusively used in Weihong System;

l Adjustable button function;

l Facing to router, Waterjet and plasma cutting, laser cutting machine.

**Delivery against payment. The freight is excluded in the price.

Operation Instruction
Start /Pause	Loading machining file, under idle state, machining will be started after pressing this button; On the contrary, machining will be paused
Stop	Stopping current operation; Under machining state, machining will be stopped after pressing this button
Breakpoint Resume	Under stop state, machining will be resumed from breakpoint after pressing this button
Serial	Manual Serial
Spindle Switch	If the spindle is off, spindle will be on after pressing this key; On the contrary, spindle will be off
Setting as Origin	Setting current point as workpiece origin
Back to Origin	Execution command of backing to workpiece origin by System
×1	Setting Jog step-length as 0.01 mm
×10	Setting Jog step-length as 0.1 mm
×100	Setting Jog step-length as 1 mm
X+	Moving the cutter towards positive direction of X axis. Under serial state, cutter will serially move at low manual speed after pressing X+; Pressing combination key (shift key and X+ simultaneously, pressing X+ after shift key, without releasing shift key), cutter will serially move at high manual speed

X-	Moving the cutter towards negative direction of X axis; motion speed and step-length, combination key are identical to introduction of X +
Y+	Moving the cutter towards positive direction of Y axis; motion speed and step-length, combination key are identical to introduction of X +
Y-	Moving the cutter towards negative direction of Y axis; motion speed and step-length, combination key are identical to introduction of X +
Z+	Moving the cutter towards positive direction of Z axis; motion speed and step-length, combination key are identical to introduction of X +
Z-	Moving the cutter towards negative direction of Z axis; motion speed and step-length, combination key are identical to introduction of X +
F-	Decreasing Feedrate
F+	Increasing Feedrate

Dimension